How can we help you?

UMIK-1 17

• Where is my UMIK-1/2 calibration file?
• How do I do the loopback calibration that REW says I should do?
• What is the UMIK-1 sample rate?
• What software do I need?
• Which direction should I point the UMIK-1?
• Do I have to use a UMIK-1 with miniDSP?
• My UMIK-1 isn't working, what should I do?
• Can I measure subwoofer below 20Hz with a UMIK-1?

See all 17 articles

UMIK-2 7

• Why should I get the UMIK-2 instead of the UMIK-1?
• Where do I find the calibration files for the UMIK-2?
• What if I lost my serial number for the UMIK-2?
• What is the sample rate of the UMIK-2?
• How do I upgrade the firmware of my UMIK-2?
• Do I need a driver to use UMIK-2 with Windows?
• What if there are unwanted low frequencies cut for my measurement?

2x4 HD kit/box 4

• What is the difference between 2x4 and 2x4HD?
• I can't install the driver "Code52" under Windows
• Outputs 2&4 are not working, is my miniDSP 2x4/2x4HD broken?
• Can I use a RCA to XLR adapter with my 2x4HD?

SHD and SHD Studio 22

• Can I use subwoofers with the SHD series?
• Can I use stereo subwoofers?
• What if I want to use a multisub configuration with more than two subwoofers?
• Can I use a non-miniDSP calibrated microphone with the SHD Series?
• Do I need to pay more to upgrade to the full version of Dirac Live?
• Why doesn’t it sound right?
• Why do I get distortion when I turn on Dirac Live?
• How do I use an external DAC?

See all 22 articles

Flex Series 7

• Which plugin is compatible with the Flex Series?
• Flex Balanced connectivity: Which TRS to RCA cable should I use?
• Does my Bluetooth Source (Phone/Player) supports LDAC?
• I'm using a TRS to RCA stereo cable and not getting any signal on my subwoofer. Why is that?
• Can l load my Dirac Live DDRC-24 project into a Flex + Dirac Live license?
• Why do I get "error launching installer" when running the plugin installation on windows 11?
• Would my custom linear power supply improve the Flex performance?

Flex Eight 3

• My configuration requires an analog input, how can I use the Flex Eight?
• How can I import my 2x8/4x10 configuration to the Flex Eight?
• I want to replace my AVR with a Flex Eight, would it work?

Flex HT / HTx 7

• What is the minidsp Flex HT and what it isn't?
• What is HDMI ARC?
• What is HDMI eARC?
• Summary of tested HDMI configurations with Flex HT/HTx
• I recently purchased a miniDSP Flex HT without the Dirac Live multi-channel license option. Is it possible to add this option at a later time? Is the cost of upgrade the same??
• Is the Flex HT an 8 channel USB DAC?
• Can I use the Flex HT/HTx as an HDMI earc extractor?

Dirac Series (DDRC-24/DDRC-22/DDRC-88A/DDRC-88D) 13

• Which plugin do I need to buy for the Dirac Series?
• Do I really need to do all those measurements?
• I already have a Dirac Live license, can I use it with the DDRC?
• I already have a UMIK-1, can I order the DDRC without it?
• I already have a different measurement microphone, can I use it instead of getting a UMIK-1?
• Can I use my OpenDRC with the Dirac Live software?
• What is the processing latency through a DDRC 22 unit ?
• DDRC-88A and multiple subs

See all 13 articles

miniDSP DC 1

• Is my product currently supported by the miniDSP Device Console (DC)?

2x8, 4x10 HD, 8x8, and 10x10 HD 6

• Which plugin do I need?
• How do I get more than two digital output channels from DIGI-FP?
• How do I get multi-channel digital input, like Dolby Digital or DTS?
• Can I get the pinout/protocol for the VOL-FP header so I can interface to my own microcontroller?
• Can I upgrade my 4x10 HD or 10x10 HD to Dirac Live?
• Is there a plugin that runs the 10x10 HD at 96 kHz?

2x4 kit/box 7

• Which plugin do I need?
• Can I use one 2x4 for each channel?
• How do I get all four output channels digitally?
• Can I connect power and USB together?
• How to connect multiple subwoofer to a miniDSP 2x4?
• What does "DSP firmware needs to be recovered error" means?
• How can I solve the "Warning!! Error input: Missing biquad value(s)"?

CDSP 8x12 DL 5

• Can I use a non-miniDSP calibrated microphone with the C-DSP 8x12 DL?
• What is the best target curve?
• I’m making an active system. Should I use one Dirac channel per driver?
• When do I use the Mixer page and when do I use the Routing page?
• Does the C-DSP 8x12 DL have Dirac Live 2.0?

PWR-ICE 125/250 9

• Which plugin do I need to buy?
• Can I connect to the PWR series plate amp using USB instead of Ethernet?
• What if I’m in the field and don’t have an Ethernet network?
• How do I connect a regular (SPDIF/coax) digital source?
• How do I connect a TOSLINK digital source?
• Can I high pass the digital link output of a PWR-ICE amplifie?
• Why is there no analog link output?
• How do I generate a high-passed signal to feed the main speakers?

See all 9 articles

USBStreamer and MCHStreamer 12

• What’s the difference between the USBStreamer and the miniStreamer?
• Can I stream native DSD with a USBStreamer?
• How do I connect a DAC?
• Can I use it to record an analog signal with the computer?
• What is “ADAT”?
• What software can I use for multi-channel output with the USBStreamer?
• Can I use more than one USBStreamer/MCHStreamer for more channels?
• Does the USBStreamer support WASAPI?

See all 12 articles

miniSHARC 10

• Which plugin do I need?
• What else do I need?
• Why use the miniSHARC instead of a nanoDIGI or miniDSP 2x8?
• Can I use the OpenDRC plugin on the miniSHARC?
• Does the VOL-FP work with the miniSHARC?
• Does the DIGI-FP work with the miniSHARC?
• Does the AN-FP work with the miniSHARC?
• How do I interface the miniSHARC with my own microcontroller?

See all 10 articles

OpenDRC series 5

• Which plugin do I need to buy for the OpenDRC-DI?
• What else do I need for the OpenDRC?
• How do I generate the digital room correction filters?
• Can I use the OpenDRC with REW auto-EQ?
• Is there a version with digital input and analog output?

nanoDIGI 2x8 7

• Which plugin do I need?
• Why use a nanoDIGI instead of a 2x8 or 4x10 Hd?
• Will it work with this DAC?
• Why do I need to buy so many DACs?
• How do I get an analog signal input into the nanoDIGI?
• Is there a volume control for the nanoDIGI?
• Can I upgrade the nanoDIGI to Dirac Live?

WIDG 1

• I can't discover my miniDSP Device when connected to the WIDG. What could be wrong?