USBStreamer and MCHStreamer
Two configuration that are majorly different when it comes to USB audio implementation and our involvement in the firmware.
The miniStreamer supports ...
Sun, 3 Nov, 2019 at 8:20 PM
No, the USBStreamer do not support native DSD but the MCHStreamer does it fine. Make sure to check out the MCHStreamer for more details.
Sun, 3 Nov, 2019 at 8:20 PM
If your DAC has SPDIF/TOSLINK interface, it might be easiest to use that format to interface to it.
For the USBStreamer/MCHStreamer, you can also use I2S D...
Sun, 3 Nov, 2019 at 8:20 PM
No, the USBStreamer and miniStreamer do not have an analog input.They only have a digital input (SPDIF or Toslink)
Sun, 3 Nov, 2019 at 8:20 PM
ADAT is a standard for transfer of 8 channels of digital audio at 48 kHz over an optical connection. It used in sound production (“pro”) equipment.
Sun, 3 Nov, 2019 at 8:20 PM
It depends on your platform and what specifically you are trying to do.
- For audio playback, JRiver and Pure Music supports active crossovers and multi-ch...
Sun, 3 Nov, 2019 at 8:20 PM
Yes, however each one needs a unique USB ID so they don’t conflict. The USB ID is set in firmware, so each must have a different firmware package loaded. If...
Sun, 3 Nov, 2019 at 8:21 PM
Yes, it indeed does and was tested accordingly by our team.
Sun, 3 Nov, 2019 at 8:21 PM
For those of you looking for a 16x16 USB audio interface, combining 2 x USBstreamer will work well. Here are few tips and tricks depending on your software: ...
Sun, 3 Nov, 2019 at 8:21 PM
The USBStreamer and MCHStreamer support only one protocol type, depending on the firmware loaded. If you have the ADAT firmware loaded and want to use TOSLIN...
Sun, 3 Nov, 2019 at 8:21 PM