SHD and SHD Studio
Yes, for one subwoofer, connect it to output 3. For two subwoofers, connect to outputs 3 and 4. For more information, see the application note Subwoofer Inte...
Sun, 3 Nov, 2019 at 8:20 PM
Yes, this configuration is like a two-way speaker but with a low crossover frequency. Set the routing matrix so that left and right input channels are routed...
Sun, 3 Nov, 2019 at 8:20 PM
One option is to connect more than one subwoofer to each subwoofer output. This gives up independent control of each individual subwoofer, but there are meth...
Sun, 3 Nov, 2019 at 8:20 PM
No – only the miniDSP UMIK-1 will be recognized by Dirac Live Calibration Tool. Any other microphone or audio interface will not work.
Sun, 3 Nov, 2019 at 8:20 PM
No, all miniDSP products with Dirac Live already have the “full” version of Dirac Live.
Sun, 3 Nov, 2019 at 8:20 PM
Because rooms and speakers are so different, there isn’t a “right answer” for room correction that will work in any situation. Often, it’s necessary to exper...
Sun, 3 Nov, 2019 at 8:20 PM
Usually, this is caused by overboosting. Remember that all EQ requires additional headroom. In the case of Dirac Live, it will boost by up to 10 dB, so if yo...
Sun, 3 Nov, 2019 at 8:21 PM
Just connect the DAC input to the OUT1&2 digital output on the SHD (or SHD Studio). The DAC must be able to work with 96 kHz sample rate. We recommend us...
Sun, 3 Nov, 2019 at 8:21 PM
You cannot connect a USB DAC to the SHD or SHD Studio. Connect a DAC with coax S/PDIF input to the SHD, or a DAC with coax S/PDIF or AES/EBU input to the SHD...
Sun, 3 Nov, 2019 at 8:21 PM
Connect a second DAC to the OUT3&4 digital output on the SHD or SHD Studio.
Sun, 3 Nov, 2019 at 8:21 PM