UMIK-1 related questions

Where is the calibration file?
You can download it from the UMIK-1 product page.
Sun, 3 Nov, 2019 at 8:20 PM
How do I do the loopback calibration that REW says I should do?
With the UMIK-1, there is no need for loopback calibration.
Sun, 3 Nov, 2019 at 8:20 PM
What is the UMIK-1 sample rate?
The UMIK-1 operates at 48 kHz.
Sun, 3 Nov, 2019 at 8:20 PM
What software do I need?
You can use any measurement program that accepts a calibration file. Examples include Room EQ Wizard (cross-platform), Room EQ Wizard (Windows and Mac, free...
Sun, 3 Nov, 2019 at 8:20 PM
Which direction should I point the UMIK-1?
The UMIK-1 comes with two unique calibration files depending on two types of measurements: - 0deg: This calibration file is for Stereo and 2.1/2.2 systems....
Mon, 19 Oct, 2020 at 9:42 AM
Do I have to use a UMIK-1 with miniDSP?
In most cases, no. We created the UMIK-1 to provide a simple, inexpensive path to accurate acoustic measurements, in keeping with the philosophy of the whol...
Sun, 3 Nov, 2019 at 8:21 PM
My UMIK-1 isn't working, what should I do?
You've just unpacked your UMIK-1, plugged it to your PC/Mac yet you're not able to see it as a device. What's going on? Isn't it supposed...
Sun, 3 Nov, 2019 at 8:21 PM
Can I measure subwoofer below 20Hz with a UMIK-1?
You indeed can. The UMIK-1 is rated  20~20kHz +/-1dB based on the calibration file however it will measure perfectly fine down to 5Hz. :-)
Tue, 4 May, 2021 at 5:43 PM
What is the UMIK-1 thread size?
The thread used is 3/8"-16.  If you're trying to use a photography tripod maybe,  there are adaptors out there doing 3/8"-16 to 1/4"...
Tue, 4 May, 2021 at 5:44 PM
What if I lost my serial number for my UMIK-1?
The serial number for the UMIK-1 can usually be found on a sticker stuck on the microphone body. In case it is missing, you can always go back to the packag...
Fri, 18 Jun, 2021 at 4:39 PM