2x4HD to DDRC-24 Upgrade / DDRC-24
No – only the miniDSP UMIK-1 will be recognized by Dirac Live Calibration Tool. Any other microphone or audio interface will not work.
Sun, 3 Nov, 2019 at 8:20 PM
No, all miniDSP products with Dirac Live already have the “full” version of Dirac Live.
Sun, 3 Nov, 2019 at 8:20 PM
This isn’t possible – the DDRC-24 accepts a stereo PCM signal only. Set your source to downmix to stereo PCM.
Sun, 3 Nov, 2019 at 8:20 PM
Yes, in order to keep the cost down this is the optimal solution. Sample rates higher than 48 kHz will be down-converted at the input to the DDRC-24, but man...
Sun, 3 Nov, 2019 at 8:20 PM
The default processing configuration is suitable for a two-way active speaker and has a 1 kHz crossover on the output channels. Before playing audio, check a...
Sun, 3 Nov, 2019 at 8:20 PM
This is an assumption in the Dirac Live software: turning Dirac Live off turns off the filtering but not the delay and gain adjustments. If you want to have ...
Sun, 3 Nov, 2019 at 8:21 PM
Purchase the upgrade from our website, then follow the instructions in the User Manual. This is a manual process and may take a few days to complete.
Sun, 3 Nov, 2019 at 8:21 PM
No - each license is locked to one hardware unit. Once you have used the provided key to upgrade a 2x4 HD, you cannot use it to upgrade another.
Sun, 3 Nov, 2019 at 8:21 PM
No, the miniDSP license is completely separate and is locked to the hardware unit.
Sun, 3 Nov, 2019 at 8:21 PM
Yes, you can easily switch from DDRC-24 to 2x4HD and back to DDRC-24 by loading the appropriate firmware to the unit. Steps should be as follow for say a DD...
Sun, 3 Nov, 2019 at 8:21 PM