Issue: Connecting UMIK-1/UMIK-2 to the Mac's USB-C port. When going to Mac > Sound Preferences > Input, it shows "No input devices found". 


- Please ensure to have the UMIK plugged into your MAC with a short USB cable (no hubs, no extensions).

- If the Mac has a USB-C port, please ensure to use a USB-C to C cable.

- Go to Application > Utilities > Audio MIDI Setup. If UMIK is being detected/connected, you should see UMIK is listed on the left side. Please ensure to select the appropriate format that shows on the below circle:

Allow microphone access to specific software:

-Go to System Preferences > Security & Privacy > Privacy(tab) > Microphone(left side). You can manually give access to the microphone from here.