2x4 kit/box questions

2.1 system plus center channel

Is it possible to use the 2x4 like this: Input stereo Output 1+2: Stereo with high pass filter (for satellites) Output 3: subwoofer with lowpass and all other goodies Output 4: center channel (sum of the in...

1 Agent Answer

max input jumper

What 'max input jumper' should I choose if I am ordering a minidsp2x4 ? I intend to add a 2nd subwoofer in my current setup and want to use minidsp2x4 for calibrating/syncing 2 subs together. Thank...

1 Agent Answer

Single Amplification

I am building a simple two way open baffle system. Wavering between passive and miniDSP. One huge factor driving my decision is that I do not want to use a separate amp for each channel. I want one amp driving...

1 Agent Answer

Programmable Delay

Does this allow a programmable delay to be specified for each output?

1 Agent Answer

Rear/Center Channel

When using the Rear/Center Channel plug-in in sum mode for a center channel, is it possible to send that summed signal to the fourth output with a different bandpass filter for use with a subwoofer? Meaning two...

1 Agent Answer

Which plugin should i use

i want to use the minidsp 2x4 in my car, i have a stereo speakers in the front doors and rear doors, and a subwoofer in the trunk. i have crossover settings on the amp (hi-pass and lowpass) for the front and...

1 Agent Answer

Upgrade to balanced possible?

Hi there, i own the mini dsp 2x4 and given my current audio equipment comes (also) with balanced outputs and assuming that they should be preferred, if possible, i am wondering if there is a way that i can upgr...

1 Agent Answer

Balanced Input / Unbalanced Output

Hi, My Amps are Unbalanced (RCA), but i would like to use Balanced signal in the miniDSP input. What is best to do? I cannot find a good solution. Cheers. (sorry for my English...)

1 Agent Answer