CDSP 8x12 DL

Can I use a non-miniDSP calibrated microphone with the C-DSP 8x12 DL?

No – only the miniDSP UMIK-1 will be recognized by Dirac Live Calibration Tool. Any other microphone or audio interface will not work.

Read Article

What is the best target curve?

The “best” target curve is very much a matter of taste. However, because a vehicle environment is much smaller than a home listening room, the default target curve may sound bass-light, so you may want to start...

Read Article

I’m making an active system. Should I use one Dirac channel per driver?

That is our usual recommendation: 1. Use the output channels for crossover, delay between drivers, and basic EQ on the drivers so that the crossover gets a good transition between them; 2. Apply Dirac Live to f...

Read Article

When do I use the Mixer page and when do I use the Routing page?

This depends on the specifics of the configuration. See the Application Guide section of the User Manual for examples that show when to use each matrix.

Read Article

Does the C-DSP 8x12 DL have Dirac Live 2.0?

No. We are currently beta testing Dirac Live 2.0 with selected products but are unable to say if the C-DSP 8x12 DL will be upgraded to Dirac Live 2.0.

Read Article